Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 122
Table, 2. Interface Configuration Fields, If you make changes to the click
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Figure 4-2 Table 4-2. Interface Configuration Fields Field Description Interface Indicates the interface to be affected by the Interface Shaping Rate. Select the check box in the heading row to apply a trust mode or rate to all interfaces. Select the check box next to an individual port to apply a trust mode or rate to a specific interface. Interface Trust Mode Specifies whether or not an interface (or all interfaces if all interfaces are selected) trust a particular packet marking when the packet enters the port. The default value is trust 802.1p. The mode can only be one of the following: • Untrusted • 802.1p • DSCP Interface Shaping Rate Specifies the maximum bandwidth allowed, typically used to shape the outbound transmission rate in increments of 64 kbps in the range of 1616384. This value is controlled independently of any per-queue maximum bandwidth configuration. It is effectively a second-level shaping mechanism. The default value is 0, in increments of 16. A value of 0 means the maximum is unlimited. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. If you make changes to the page, click Apply to apply the changes to the system. 4-4 Configuring Quality of Service v1.0, July 2009