Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 199
Monitoring, FLASH Log, system operation log
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual • The second log type is the system operation log. The system operation log stores the last N messages received during system operation. This log always has the log full operation attribute set to overwrite. This log can store up to 1000 messages. Either the system startup log or the system operation log stores a message received by the log subsystem that meets the storage criteria, but not both. In other words, on system startup, if the startup log is configured, it stores messages up to its limit. The operation log, if configured, then begins to store the messages. Use the FLASH Log Configuration page to enable or disable persistent logging and to set the severity filter. To access the FLASH Log Configuration page: 1. Click the Monitoring Logs tab, and then click the FLASH Log link. Figure 6-6 Monitoring the System v1.0, July 2009 6-17