Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 54

GS716Tv2 and GS724Tv3 Software Administration Manual Figure 2-12 Table 2-14. SNMP v3 User Configuration Field SNMP v3 Access Mode Authentication Protocol Encryption Protocol Encryption Key Description The SNMPv3 access privileges for the user account. The admin account always has Read/Write access, and all other accounts have Read Only access. Specify the SNMPv3 Authentication Protocol setting for the selected user account. The valid Authentication Protocols are None, MD5, or SHA. If you select: • None - The user will be unable to access the SNMP data from an SNMP browser. • MD5 or SHA - The user login password will be used as SNMPv3 authentication password, and you must therefore specify a password. The password must be eight characters in length. Specify the SNMPv3 Encryption Protocol setting for the selected user account. The valid Encryption Protocols are None or DES. If you select the DES Protocol, you must enter a key in the Encryption Key field. If None is specified for the Protocol, the Encryption Key is ignored. If you selected DES in the Encryption Protocol field, enter the SNMPv3 Encryption Key here. Otherwise, this field is ignored. Valid keys are 0 to 15 characters long. The Apply check box must be checked in order to change the Encryption Protocol and Encryption Key. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 2-22 v1.0, July 2009 Configuring System Information