Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 123

GS716Tv2 and GS724Tv3 Software Administration Manual Interface Queue Configuration Use the Interface Queue Configuration page to define what a particular queue does by configuring switch egress queues. User-configurable parameters control the amount of bandwidth used by the queue, the queue depth during times of congestion, and the scheduling of packet transmission from the set of all queues on a port. Each port has its own CoS queue-related configuration. The configuration process is simplified by allowing each CoS queue parameter to be configured globally or per-port. A global configuration change is automatically applied to all ports in the system. To display the Interface Queue Configuration page: 1. Click the QoS  CoS tab, and then click the Advanced  Interface Queue Configuration link. Figure 4-3 Table 4-3. Interface Queue Configuration Fields Field Interface Queue ID Description Indicates the interface to configure. Select the check box in the heading row to apply a trust mode or rate to all interfaces. Select the check box next to an individual port to apply a trust mode or rate to a specific interface. Use the menu to select the queue to be configured. Configuring Quality of Service 4-5 v1.0, July 2009