Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 217
Maintenance, File Management, Dual Image, Dual Image Configuration, Activate, Image, Image Name
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual 1. Click Maintenance File Management Dual Image Dual Image Configuration in the navigation menu. Figure 7-6 The Active Image page contains the following fields: Table 7-4. Dual Image Configuration Fields Field Image Name Current Active Image Description Description Select image1 or image2 from the drop down menu to display or configure information about that software image. Displays name of current active image. If desired, enter a descriptive name for the software image. 2. Click Activate Image to make the image that is selected in the Image Name field the next active image for subsequent reboots. Note: After activating an image, you must perform a system reset of the switch in order to run the new code. 3. If the file you uploaded contains the boot loader code only, click Update Bootcode. 4. Click Refresh to reload the page and display the most current information. 5. Click Delete Image to remove the selected image from permanent storage on the switch. You cannot delete the active image. Maintenance v1.0, July 2009 7-11