Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 72

GS716Tv2 and GS724Tv3 Software Administration Manual Table 3-4. LAG Membership Fields (continued) Field Port Selection Table Current Members Description Select the ports as members of this LAG. Displays the LAGs on the current channel. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. LACP Configuration To display the LACP Configuration page: 1. Click Switching LAG  Advanced  LACP Configuration in the navigation tree. Figure 3-5 Table 3-5. LACP Configuration Fields Field Description LACP System Priority Specifies the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. A higher value indicates a lower priority. You can change the value of the parameter globally by specifying a priority from 0-65535. The default value is 32768. 2. Click Refresh to reload the page and display the most current information. 3-8 Configuring Switching Information v1.0, July 2009