Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 125

GS716Tv2 and GS724Tv3 Software Administration Manual Table 4-4. Current 802.1p Priority Mapping Table Fields Field Description Global Interface Select the Global option to apply the same 802.1p priority mapping to all CoS configurable interfaces. The menu contains all CoS configurable interfaces. Select an individual interface from the menu to override the global settings for 802.1p priority mapping on a perinterface basis. 802.1p Priority This row contains traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic and is sent using "best effort." Traffic with a higher priority, such as 3, might be time-sensitive traffic, such as voice or video. The values in each drop down menu represent the traffic class. The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. 2. If you make changes to the page, click Apply to apply the changes to the system. DSCP to Queue Mapping Use the DSCP to Queue Mapping page to specify which internal traffic class to map the corresponding DSCP value. To display the IP DSCP Mapping page: Configuring Quality of Service 4-7 v1.0, July 2009