Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 203
Trap Logs, Monitoring
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Trap Logs Use the Trap Logs page to view information about the SNMP traps generated on the switch. To access the Trap Logs page: 1. Click the Monitoring Logs tab, and then click the Trap Logs link. Figure 6-8 Table 6-11. Trap Log Statistics Field Description Number of Traps Since Last Reset The number of traps that have occurred since the switch last reboot. Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds the capacity, the entries will overwrite the oldest entries. Number of Traps Since Log Last Viewed The number of traps that have occurred since the traps were last displayed. Displaying the traps by any method (such as terminal interface display, Web display, or upload file from switch) will cause this counter to be cleared to 0. The page also displays information about the traps that were sent. Monitoring the System v1.0, July 2009 6-21