Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 164
Protected Ports Membership, Table, 27. Port Security Settings Fields
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Figure 5-23 Table 5-27. Port Security Settings Fields Field Convert Dynamic Address to Static Description Select the check box to convert a dynamically learned MAC address to a statically locked address. The Dynamic MAC Address entries are converted to Static MAC address entries in a numerically ascending order until the Static limit is reached. Table 5-28. Dynamic MAC Address Table Fields Field Description Port List Select the physical interface for which you want to display data. VLAN ID MAC Address Displays the VLAN ID corresponding to the Last Violation MAC address. Displays the MAC addresses learned on a specific port. 2. Click Refresh to refresh the page with the most current data from the switch. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make changes to the page, click Apply to apply the changes to the system. Protected Ports Membership Use the Protected Ports Membership page to configure the ports as protected or unprotected. You need read-write access privileges to modify the configuration. 5-38 v1.0, July 2009 Managing Device Security