Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 87
CST Port Status, Refresh, Cancel, Apply, Switching, Advanced
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Table 3-13. Spanning Tree CST Port Configuration/Status Fields (continued) Field Port ID Hello Timer Description The port identifier for the specified port within the CST. It is made up from the port priority and the interface number of the port. Specifies the switch Hello time, which indicates the amount of time in seconds a port waits between configuration messages. The value is fixed at 2 seconds. 2. Click Refresh to update the information on the screen with the most current data. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make any configuration changes, click Apply to send the updated configuration to the switch. Configuration changes take place immediately. CST Port Status Use the Spanning Tree CST Port Status page to display Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on the switch. To display the Spanning Tree CST Port Status page: 1. Click SwitchingSTPAdvanced CST Port Status in the navigation tree. Figure 3-14 Configuring Switching Information v1.0, July 2009 3-23