Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 181
Table, 37. IP ACL Binding Configuration Fields
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Figure 5-33 Table 5-37. IP ACL Binding Configuration Fields Field Description ACL ID Select an existing IP ACL. Direction Sequence Number Port Selection Table Specifies the packet filtering direction for ACL. The only valid direction is Inbound, which means the IP ACL rules are applied to traffic entering the port. An optional sequence number may be specified to indicate the order of this access list relative to other access lists already assigned to this interface and direction. A lower number indicates higher precedence order. If a sequence number is already in use for this interface and direction, the specified access list replaces the currently attached access list using that sequence number. If the sequence number is not specified by the user, a sequence number that is one greater than the highest sequence number currently in use for this interface and direction will be used. The valid range is 1-4294967295. Specifies list of all available valid interfaces for ACL binding. All nonrouting physical interfaces and interfaces participating in LAGs are listed. Click the orange bar to view all the available interfaces. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. Click Apply to save any changes to the running configuration. Managing Device Security v1.0, July 2009 5-55