Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 131
Server Configuration, Security, Management Security, RADIUS, Server, Configuration
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Server Configuration Use the RADIUS Server Configuration page to view and configure various settings for the current RADIUS server configured on the system. To access the RADIUS Server Configuration page: 1. Click Security Management Security, and then click the RADIUS Server Configuration link. Figure 5-3 Table 5-3. RADIUS Server Configuration Fields Field Server Address Authentication Port Secret Configured Secret Description Enter the IP address of the RADIUS server to add. To modify settings for a RADIUS server that is already configured on the switch, select the check box next to the server address. Identifies the authentication port the server uses to verify the RADIUS server authentication. The port is a UDP port, and the valid range is 0- 65535. You can only enter a RADIUS secret if you select Yes from the menu. After you add the RADIUS server, this field indicates whether the shared secret for this server has been configured. Shared secret text string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This secret must match the RADIUS encryption. Managing Device Security 5-5 v1.0, July 2009