Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 77
Table, 8. VLAN Membership Configuration Fields
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Figure 3-9 3. To change the VLAN tagging for one or more ports, click each port to make traffic forwarded by the interface tagged (T) or untagged (U). Table 3-8. VLAN Membership Configuration Fields Field VLAN ID Group Operation VLAN Name Description Select the VLAN Identifier for which you want to display or configure data. Use this field to select all the ports and configure them. Possible values are: • Untag All: Select all the ports on which all frames transmitted from this VLAN will be untagged. All the ports will be included in the VLAN. • Tag All: Select the ports on which all frames transmitted for this VLAN will be tagged. All the ports will be included in the VLAN. • Remove All: This selection has the effect of excluding all ports from the selected VLAN. This field identifies the name for the VLAN you selected. It can be up to 32 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 is always named "Default." Configuring Switching Information v1.0, July 2009 3-13