Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 163

GS716Tv2 and GS724Tv3 Software Administration Manual Table 5-26. Port Security Configuration Fields (continued) Field Max Allowed Dynamically Learned MAC Max Allowed Statically Locked MAC Enable Violation Traps Description Sets the maximum number of dynamically learned MAC addresses on the selected interface. Valid range is 0-600. Sets the maximum number of statically locked MAC addresses on the selected interface. Valid range is 0-20. Enables or disables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. 2. To display the list of Ports, click PORTS. 3. To display the list of LAGs, click LAGS. 4. To display a list of both Ports and LAGs, click ALL. 5. To go to an interface in the list, type the interface number in the Go To Interface field and click Go. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. If you make changes to the page, click Apply to apply the changes to the system. Security MAC Address Use the Security MAC Address page to convert a dynamically learned MAC address to a statically locked address. To display the Security MAC Address page: 1. Click Security  Traffic Control, and then click the Port Security  Security MAC Address link. Managing Device Security v1.0, July 2009 5-37