Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 85

GS716Tv2 and GS724Tv3 Software Administration Manual Table 3-11. Spanning Tree CST Configuration/Status Fields (continued) Field Bridge Forward Delay (secs) Spanning Tree Maximum Hops Description Specifies the switch forward delay time, which indicates the amount of time in seconds a bridge remains in a listening and learning state before forwarding packets. The value must be greater or equal to (Bridge Max Age / 2) + 1. The time range is from 4 seconds to 30 seconds. The default value is 15. Specifies the maximum number of bridge hops the information for a particular CST instance can travel before being discarded. The valid range is 1-127. Displayed on the Spanning Tree CST Configuration page is the MSTP Status table. Table 3-12. Spanning Tree MSTP Status Fields Field MST ID VID FID Description Table consisting of the MST instances (including the CST) and the corresponding VLAN IDs associated with each of them. Table consisting of the VLAN IDs and the corresponding FID associated with each of them Table consisting of the FIDs and the corresponding VLAN IDs associated with each of them. 2. Click Refresh to update the information on the screen with the most current data. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch 4. If you make any configuration changes, click Apply to send the updated configuration to the switch. Configuration changes take place immediately. CST Port Configuration Use the Spanning Tree CST Port Configuration page to configure Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on the switch. To display the Spanning Tree CST Port Configuration page: 1. Click SwitchingSTPAdvanced  CST Port Configuration in the navigation tree. Configuring Switching Information v1.0, July 2009 3-21