Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 93

GS716Tv2 and GS724Tv3 Software Administration Manual Figure 3-19 Table 3-17. Spanning Tree MST Port Status Fields Field Select MST Interface Port Priority Port Path Cost Auto-calculated Port Path Cost Port ID Port Up Time Since Counters Last Cleared Port Mode Description Select an existing MST instance from the pull down list of MST IDs in the Status table at the top of the screen. Select a physical or port channel interface to configure. The port is associated with the VLAN(s) associated with the selected MST instance. The priority for a particular port within the selected MST instance. The port priority is set in multiples of 16. If you specify a value that is not a multiple of 16, the priority is set to the priority is automatically set to the next lowest priority that is a multiple of 16. For example, if you set a value between 0 and 15, the priority is set to 0. If you specify a number between 16 and 31, the priority is set to 16. Set the Path Cost to a new value for the specified port in the selected MST instance. It takes a value in the range of 1-200000000. Displays whether the path cost is automatically calculated (Enabled) or not (Disabled). Path cost is calculated based on the link speed of the port if the configured value for Port Path Cost is zero. The port identifier for the specified port within the selected MST instance. It is made up from the port priority and the interface number of the port. Time since the counters were last cleared, displayed in Days, Hours, Minutes, and Seconds. Spanning Tree Protocol Administrative Mode associated with the port or port channel. Possible values are Enable or Disable. Configuring Switching Information v1.0, July 2009 3-29