Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 175
Security, Advanced, IP Rules, Delete, Cancel, Apply, Table
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual 1. Click Security ACL, then click the Advanced IP Rules link. Figure 5-30 2. To add an IP ACL rule, select the ACL ID to add the rule to, complete the fields in the Basic ACL Rule Table and then click Add. 3. To delete an IP rule, select the check box associated with the rule, and then click Delete. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. If you change any of the settings on the page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. Table 5-35. IP ACL Rule Configuration Fields Field ACL ID Rule ID Description The menu contains the existing IP ACLs configured on the page. To set up a new IP ACL, see "IP ACL". This field is only available if you select Create Rule from the Rule field. Enter a new Rule ID. After you click Apply, the new ID is created and you can configure the rule settings. You can create up to 10 rules for each ACL. Managing Device Security v1.0, July 2009 5-49