Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 100

BEFORE USING THE MACHINE REPLACING THE STAPLE CARTRIDGE When using the finisher (3 trays), a message will appear on the operation panel when the staple cartridge runs out of staples. Follow the procedure below to replace the staple cartridge. Open the front cover on the left of the finisher. 1 (1) Lift the green stapler lever. 2 (2) Slide out the staple cartridge. (3) (1) (2) 3 (1) 4 Press the sides from both directions (1) and open the cover in the direction of the arrow (2). Pull the empty staple case straight up and out of the cartridge (3). Insert a new staple case into the cartridge. Push the staple case all the way in until it clicks into place. Do not remove the seal that holds the staples before setting it in the staple cartridge. 1-59 Contents