Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 107

BEFORE USING THE MACHINE SHARP OSA Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application. There are two types of external applications: "standard application" and "external account application". An "external account application" is used for centralized account management of a multifunction machine on a network. A "standard application" refers to all other applications. APPLICATION COMMUNICATION MODULE (MX-AMX2) MX-M623N/MX-M753N is included as standard equipment. When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves the operation screen from the registered URL. Control of the operation screen is performed by the standard application, and Scan to FTP, Scan to Network Folder, and HTTPS transmission can be executed. Standard application setup To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard application in the screen that appears. Selecting a standard application The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained below. COPY IMAGE SEND Ready to scan for copy. DOCUMENT FILING Touch the [Sharp OSA] key in the mode 0 select keys. 1 Exposure Auto Plain 81/2x11 Special Modes 2-Sided Copy Output File If no standard applications have been stored in the Web pages, the key cannot be touched. Quick File Copy Ratio 100% Original Auto 8½x11 Paper Select Auto 8½x11 Plain Preview 1-66 Contents