Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 764

SYSTEM SETTINGS Resetting user counts Select a user in the setting screen and touch the [Reset] key. A count reset screen for that user will appear. The reset screen will vary depending on whether a single user or multiple users were selected. The items displayed in each case are described in the table below. When a single user is selected Item Description Next This shows the next user (in the order of the registration numbers). Previous This shows the previous user (in the order of the registration numbers). Show Counts The counts and the number of pages remaining of the selected user are shown by function. Clear Count Reset the count of the selected item to "0". Clear All Counts Reset all items of the selected user to "0". When multiple users are selected Item Description Show Counts The counts and the number of pages remaining of the selected users are shown by function. Clear Count Reset the count of the selected item to "0". Clear All Count Reset all items of the selected users to "0". Card Settings (when the HID card reader is available.) Configure this setting if user authentication will be performed using a Sharp OSA external authentication application and an HID card. Card Reader Device Registration In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card reader, touch the [Read] key. * For settings that enable an HID card to be used, consult your service technician. 7-62 Contents