Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 830

TROUBLESHOOTING If a misfeed was not found in the above step, remove the misfed paper from under the paper guide. Be careful not to tear the misfed paper during removal. Return the paper guide lever to its original position. Caution The fusing unit and paper exit area are hot. Take care not to burn yourself. (Do not touch any metal parts.) Unfused toner may remain on the paper that is removed. Take care that it does not soil your hands or clothing. (6) Misfeed in the duplex unit Open the cover of the duplex unit. (4) Original misfeed Open the document feeder cover and remove the misfed originals. Open the automatic document feeder. Rotate the transfer roller in the direction of the arrow and remove the original. Press switch A to release the cover lock and remove the misfed original. After removing the original, A be sure to attach the cover securely. Remove the misfed paper. Misfeed in upper part of unit Be careful not to tear the misfed paper during removal. Misfeed in lower part of unit Be careful not to tear the misfed paper during removal. Close the cover of the duplex unit. After removing the misfeed, open and close the automatic document feeder (or the document feeding area cover or document feeder tray) to clear the misfeed display from the touch panel. (5) Paper misfeed in the fusing unit Turn roller rotating knob in the direction of the arrow to remove the misfed paper. Roller rotating knob Gently close the duplex unit. After closing the duplex unit, confirm that the misfeed message has been cleared and the normal display appears. 8-11 Contents