Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 717

SYSTEM SETTINGS Select Similar Sizes for Auto Detection "Select Similar Sizes for Auto Detection" in the tray settings screen is used to select the paper size that is automatically detected from similar sizes when automatic paper size detection takes place. Select one of two sizes when "Auto-Inch" is set. Select one of three sizes when "Auto-AB" is set. When paper that is the same size as one of the paper sizes in the settings is placed in the bypass tray, the size that is selected in the settings will be automatically detected. Auto-Inch 8-1/2" x 14", 8-1/2" x 13-2/5" (216 mm x 340 mm) Auto-AB 216 mm x 330 mm (8-1/2" x 13"), 216 mm x 340 mm (8-1/2" x 13-2/5"), 216 mm x 343 mm (8-1/2" x 13-1/2") Paper Type Registration Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties. Up to 7 paper types can be stored. Item Description Type Name Store any name. The factory default names are "User Type 1" - "User Type 7". Fixed Paper Side Disable Duplex Disable Staple Disable Punch Enable this setting when paper with a front and reverse side is used. Enable this setting when paper is loaded that cannot used for two-sided printing. Enable this setting when paper is used that cannot be stapled. Enable this setting when paper is used that cannot be punched. The settings that can be selected vary depending on the peripheral devices installed. Auto Tray Switching When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of paper is automatically selected and printing continues. 7-15 Contents