Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 829

TROUBLESHOOTING Remove any misfed paper. Be careful not to tear the misfed paper during removal. When using the finisher (3 trays) Open the front covers on the right and left of the finisher. Lift (A) up in the direction of (A) the arrow and remove any misfed paper. After removing the misfed paper, return (A) to its original position. Open the front covers on the right and left of the finisher. Pull out the green knob in the direction of the arrow. Align the triangle marks on (A) and (B), and remove any (A) misfed paper. (B) Be careful not to tear the misfed paper during removal. Close the front cover of the finisher. Press the button and gently detach the finisher from the machine. (3) Misfeed in the inserter Open the top cover. Remove any misfed paper. Be careful not to tear the misfed paper during removal. Push the finisher and gently attach it to the machine. Remove the misfed paper. Be careful not to tear the misfed paper during removal. (2) Paper misfeed in the punch module Rotate the green knob until (A) the arrow is within the range (A) on the label, and remove the misfed paper. Be careful not to tear the misfed paper during removal. If a misfeed was not found in the above step, raise the paper guide lever. Remove the misfed paper. Be careful not to tear the misfed paper during removal. 8-10 Contents