Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 95
Replacing the cartridge in the saddle stitch finisher
View all Sharp MX-M623 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
BEFORE USING THE MACHINE Close the front cover of the finisher. 7 Make a test print or copy in the staple sort mode to verify that stapling is performed properly. Replacing the cartridge in the saddle stitch finisher Only when the saddle stitch finisher (MX-FN16) is installed. Open the lower cover of the saddle stitch finisher. 1 When an optional inserter is installed, open the front cover of the inserter before opening the lower cover of the finisher. Slide out the saddle stitch unit carefully toward the front. 2 (2) (1) Grasp the grip of the saddle staple holder and pull it out. 3 (2) While still grasping the grip, rotate (1) the saddle staple holder 90° in the direction of the arrow (rotate to the right). Remove the empty staple case and set a new one. Replace both staple cases with new ones. Remove the cover 4 from the staple cartridge and then install the cartridge. 1-54 Contents