D-Link 3312SR Reference Manual - Page 100
config 802.1p user_priority, Switch Hardware
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DGS-3312SR Layer 3 Gigabit Switch config 802.1p user_priority queues available on the switch. The switch's default is to map the incoming 802.1p priority values to the eight hardware priority queues according to the following chart: 802.1p Switch Hardware Parameters Restrictions Value Priority Queue 0 2 1 0 2 1 3 3 4 4 5 5 6 6 7 7 − Specifies which of the eight 802.1p priority tags (0 through 7) you want to map to one of the switch's hardware priority queues (, 0 through 7). − Specifies to which of the switch's hardware priority queues the 802.1p priority tags (specified above) will be mapped. Only administrator-level users can issue this command. Example usage: To configure 802.1 user priority on the switch: DGS-3312SR:4# config 802.1p user_priority 1 3 Command: config 802.1p user_priority 1 3 Success. DGS-3312SR:4# show 802.1p user_priority Purpose Used to display the current 802.1p user priority tags to hardware priority queue mapping in use by the switch. Syntax show 802.1p user_priority Description The show 802.1p user_priority command will display the current 802.1p user priority tags to hardware priority queue mapping in use by the switch. Parameters None. Restrictions None. 94
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/100.png)