D-Link 3312SR Reference Manual - Page 40

DGS-3312SR Layer 3 Gigabit Switch create snmp user of exactly 40 characters, in hex form, to define the key that will be used to authorize the agent to receive packets for the host. priv - Adding the priv (privacy) parameter will allow for encryption in addition to the authentication algorithm for higher security. The user may choose: • none - Adding this parameter will add no encryption. • des - Adding this parameter will allow for a 56-bit encryption to be added using the DES-56 standard using: - Enter an alphanumeric key string of exactly 32 characters, in hex form, that will be used to encrypt the contents of messages the host sends to the agent. Restrictions Only administrator-level users can issue this command. Example usage: To create an SNMP user on the switch: DGS-3312SR:4#create snmp user dlink default encrypted by_password auth md5 auth_password priv none Command: create snmp user dlink default encrypted by_password auth md5 auth_password priv none Success. DGS-3312SR:4# delete snmp user Purpose Used to remove an SNMP user from an SNMP group and also to delete the associated SNMP group. Syntax delete snmp user Description The delete snmp user command removes an SNMP user from its SNMP group and then deletes the associated SNMP group. Parameters − An alphanumeric string of up to 32 characters that identifies the SNMP user that will be deleted. Restrictions Only administrator-level users can issue this command. Example usage: To delete a previously entered SNMP user on the switch: DGS-3312SR:4#delete snmp user dlink Command: delete snmp user dlink Success. DGS-3312SR:4# 34