D-Link 3312SR Reference Manual - Page 234
create iproute default, delete iproute, If the Primary Static/Default Route fails, the Backup Route
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
DGS-3312SR Layer 3 Gigabit Switch create iproute default Purpose Syntax Description Parameters Restrictions Used to create IP route entries to the switch's IP routing table. create iproute default {} This command is used to create a default static IP route entry to the switch's IP routing table. − The gateway IP address for the next hop router. − Allows the entry of a routing protocol metric entry representing the number of routers between the Switch and the IP address above. The default setting is 1. Only administrator-level users can issue this command. Example Usage: To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table: DGS-3312SR:4#create iproute default 10.48.74.121 1 Command: create iproute default 10.48.74.121 1 Success. DGS-3312SR:4# delete iproute Purpose Used to delete an IP route entry from the switch's IP routing table. Syntax delete iproute [primary | backup] Description This command will delete an existing entry from the switch's IP routing table. Parameters − IP address and netmask of the IP interface that is the destination of the route. You can specify the address and mask information using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). − The gateway IP address for the next hop router. [primary | backup] − The user may choose between Primary and Backup. If the Primary Static/Default Route fails, the Backup Route will support the entry. Please take note that the Primary and Backup entries cannot have the same Gateway. Restrictions Only administrator-level users can issue this command. Example Usage: To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the routing table: 228