D-Link 3312SR Reference Manual - Page 38
Command, Parameters, 16> ] | by_key auth [md5 <auth_key 32-32>| sha <auth_key 40
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
DGS-3312SR Layer 3 Gigabit Switch Command create snmp group delete snmp group show snmp groups create snmp host delete snmp host show snmp host create trusted_host delete trusted_host show trusted_host enable snmp traps enable snmp authenticate_traps disable snmp traps disable snmp authenticate_traps config snmp system contact config snmp system location config snmp system name enable rmon disable rmon Parameters {v1 | v2c |v3 [noauth_nopriv | auth_nopriv | auth_priv ]} {read_view | write_view | notify_view } {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} Each command is listed, in detail, in the following sections. create snmp user Purpose Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command. Syntax create snmp user {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} Description The create snmp user command creates a new SNMP user and adds the user to an SNMP group that is also created by this command. SNMP ensures: Message integrity − Ensures that packets have not been tampered with during transit. Authentication − Determines if an SNMP message is from a valid 32
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/38.png)