D-Link 3312SR Reference Manual - Page 272
create ospf area, delete ospf area <area_id>
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
DGS-3312SR Layer 3 Gigabit Switch create ospf area Purpose Used to configure OSPF area settings. Syntax create ospf area type [normal | stub {stub_summary [enable | disable] | metric }] Description This command is used to create an OSPF area and configure its settings. Parameters − The OSPF area ID. The user may enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. type [normal | stub] − The OSPF area mode of operation − stub or normal. stub_summary [enable | disable] − Enables or disables the OSPF area to import summary LSA advertisements. metric − The OSPF area cost between 0 and 65535. 0 denotes that the value will be automatically assigned. The default setting is 0. Restrictions Only administrator-level users can issue this command. Usage Example: To create an OSPF area: DGS-3312SR:4#create ospf area 10.48.74.122 type normal Command: create ospf area 10.48.74.122 type normal Success. DGS-3312SR:4# delete ospf area Purpose Used to delete an OSPF area. Syntax delete ospf area Description This command is used to delete an OSPF area. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Restrictions Only administrator-level users can issue this command. Usage Example: To delete an OSPF area: 266
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/272.png)