D-Link 3312SR Reference Manual - Page 189
config radius add, Command: config 802.1x reauth port_based ports 1:1-1:18
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Example usage: DGS-3312SR Layer 3 Gigabit Switch To configure 802.1x reauthentication for ports 1-10: DGS-3312SR:4#config 802.1x reauth port_based ports 1:1-1:18 Command: config 802.1x reauth port_based ports 1:1-1:18 Success. DGS-3312SR:4# config radius add Purpose Syntax Description Parameters Restrictions Used to add a new RADIUS server. config radius add key [default | {auth_port | acct_port }] The config radius add command is used to add RADIUS servers to the switch. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the switch. The lowest index number will have a higher authenticative priority − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the switch. Up to 32 characters can be used. default − Uses the default udp port number in both the "auth_port" and "acct_port" settings. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. Example usage: To configure the RADIUS server communication settings: DGS-3312SR:4#config radius add 1 10.48.74.121 key dlink default Command: config radius add 1 10.48.74.121 key dlink default Success. DGS-3312SR:4# 183
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/189.png)