D-Link 3312SR Reference Manual - Page 194

DGS-3312SR Layer 3 Gigabit Switch create access_profile the switch will examine. Masks can be entered that will be combined with the values the switch finds in the specified frame header fields. Specific values for the rules are entered using the config access_profile command, below. Parameters ethernet − Specifies that the switch will examine the layer 2 part of each packet header. • vlan − Specifies that the switch will examine the VLAN part of each packet header. • source_mac − Specifies a MAC address mask for the source MAC address. This mask is entered in the following hexadecimal format: • destination_mac − Specifies a MAC address mask for the destination MAC address. • 802.1p − Specifies that the switch will examine the 802.1p priority value in the frame's header. • ethernet_type − Specifies that the switch will examine the Ethernet type value in each frame's header. ip − Specifies that the switch will examine the IP address in each frame's header. • vlan − Specifies a VLAN mask. • source_ip_mask − Specifies an IP address mask for the source IP address. • destination_ip_mask − Specifies an IP address mask for the destination IP address. • dscp − Specifies that the switch will examine the DiffServ Code Point (DSCP) field in each frame's header. • icmp − Specifies that the switch will examine the Internet Control Message Protocol (ICMP) field in each frame's header. • type − Specifies that the switch will examine each frame's ICMP Type field. • code − Specifies that the switch will examine each frame's ICMP Code field. • igmp − Specifies that the switch will examine each frame's Internet Group Management Protocol (IGMP) field. • type − Specifies that the switch will examine each frame's IGMP Type field. • tcp − Specifies that the switch will examine each frames Transport Control Protocol (TCP) field. • src_port_mask − Specifies a TCP port mask for the source port. • dst_port_mask − Specifies a TCP port mask for the destination port. 188