D-Link 3312SR Reference Manual - Page 24

DGS-3312SR Layer 3 Gigabit Switch config serial_port Restrictions never − No time limit on the length of time the console can be open with no user input. 2_minutes − The console will log out the current user if there is no user input for 2 minutes. 5_minutes − The console will log out the current user if there is no user input for 5 minutes. 10_minutes − The console will log out the current user if there is no user input for 10 minutes. 15_minutes − The console will log out the current user if there is no user input for 15 minutes. Only administrator-level users can issue this command. Example usage: To configure baud rate: DGS-3312SR:4#config serial_port baud_rate 9600 Command: config serial_port baud_rate 9600 Success. DGS-3312SR:4# enable clipaging Purpose Used to pause the scrolling of the console screen when the show command displays more than one page. Syntax enable clipaging Description This command is used when issuing the show command which causes the console screen to rapidly scroll through several pages. This command will cause the console to pause at the end of each page. The default setting is enabled. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To enable pausing of the screen display when the show command output reaches the end of the page: DGS-3312SR:4#enable clipaging Command: enable clipaging Success. DGS-3312SR:4# 18