D-Link 3312SR Reference Manual - Page 96
show traffic control, Lookup Fail
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
DGS-3312SR Layer 3 Gigabit Switch To configure traffic control and enable broadcast storm control system wide: DGS-3312SR:4#config traffic control all broadcast enable Command: config traffic control all broadcast enable Success. DGS-3312SR:4# show traffic control Purpose Syntax Description Parameters Restrictions Used to display current traffic control settings. show traffic control {group_list } This command displays the current storm traffic control configuration on the switch. group_list − Used to specify a broadcast storm control group. This is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. None. Example usage: To display traffic control setting: DGS-3312SR:4#show traffic control 1:1-1:5 Command: show traffic control 1:1-1:5 Traffic Control Module Group [ports] 1 1 [1] 1 2 [2] 1 3 [3] 1 4 [4] 1 5 [5] Threshold --------128 128 128 128 128 Broadcast Storm --------Disabled Disabled Disabled Disabled Disabled Multicast Storm --------Disabled Disabled Disabled Disabled Disabled Destination Lookup Fail -------Disabled Disabled Disabled Disabled Disabled Total Entries: 5 DGS-3312SR:4# 90
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/96.png)