D-Link 3312SR Reference Manual - Page 17

Syntax Description Example command DGS-3312SR Layer 3 Gigabit Switch {braces} reset {[config | system]} In the above syntax example, you have the option to specify config or system. It is not necessary to specify either optional value, however the effect of the system reset is dependent on which, if any, value is specified. Therefore, with this example there are three possible outcomes of performing a system reset. See the following chapter, Basic Commands for more details about the reset command. reset config Line Editing Key Usage Delete Deletes the character under the cursor and then shifts the remaining characters in the line to the left. Backspace Deletes the character to the left of the cursor and shifts the remaining characters in the line to the left. Left Arrow Moves the cursor to the left. Right Arrow Moves the cursor to the right. Up Arrow Repeat the previously entered command. Each time the up arrow is pressed, the command previous to that displayed appears. This way it is possible to review the command history for the current session. Use the down arrow to progress sequentially forward through the command history list. Down Arrow The down arrow will display the next command in the command history entered in the current session. This displays each command sequentially as it was entered. Use the up arrow to review previous commands. Tab Shifts the cursor to the next field to the left. Multiple Page Display Control Keys Space Displays the next page. CTRL+c Stops the display of remaining pages when multiple pages are to be displayed. ESC Stops the display of remaining pages when multiple pages are to be displayed. n Displays the next page. p Displays the previous page. q Stops the display of remaining pages when multiple pages are to be displayed. r Refreshes the pages currently displayed. a Displays the remaining pages without pausing between pages. Enter Displays the next line or table entry. 11