D-Link 3312SR Reference Manual - Page 164

DGS-3312SR Layer 3 Gigabit Switch config authen parameter response_timeout Syntax Description Parameters Restrictions config authen parameter response_timeout This command will set the time the switch will wait for a response of authentication from the user. response_timeout - Set the time, in seconds, the switch will wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. Only administrator-level users can issue this command. Example usage: To configure the response timeout for 60 seconds: DGS-3312SR:4# config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 Success. DGS-3312SR:4# config authen parameter attempt Purpose Used to configure the maximum number of times the switch will accept authentication attempts. Syntax config authen parameter attempt Description This command will configure the maximum number of times the switch will accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be denied access to the switch and will be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds before another authentication attempt. Telnet users will be disconnected from the switch. Parameters parameter attempt - Set the maximum number of attempts the user may try to become authenticated by the switch, before being locked out. Restrictions Only administrator-level users can issue this command. Example usage: To set the maximum number of authentication attempts at 5: DGS-3312SR:4#config authen parameter attempt 5 Command: config authen parameter attempt 5 Success. DGS-3312SR:4# show authen parameter Purpose Used to display the authentication parameters currently configured on the switch 158