D-Link 3312SR Reference Manual - Page 110
VLAN Commands, create vlan
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
DGS-3312SR Layer 3 Gigabit Switch 15 VLAN COMMANDS The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create vlan delete vlan config vlan config gvrp enable gvrp disable gvrp show vlan show gvrp Parameters {tag | advertisement} {[add [tagged | untagged | forbidden] | delete] | advertisement [enable | disable]} [ | all] {state [enable | disable] | ingress_checking [enable | disable] | acceptable_frame [tagged_only | admit_all] | pvid } Each command is listed, in detail, in the following sections. NOTE: As a stand-alone switch or as a master switch in a switch stack, the switch number will be referred to as 15 for all configurations, graphs and tables. create vlan Purpose Syntax Description Parameters Restrictions Used to create a VLAN on the switch. create vlan {tag | advertisement} This command allows you to create a VLAN on the switch. − The name of the VLAN to be created. − The VLAN ID of the VLAN to be created. Allowed values = 1-4094 advertisement − Specifies that the VLAN is able to join GVRP. If this parameter is not set, the VLAN cannot be configured to have forbidden ports. Each VLAN name can be up to 32 characters. If the VLAN is not given a tag, it will be a port-based VLAN. Only administrator-level users can issue this command. Example usage: To create a VLAN v1, tag 2: 104
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/110.png)