D-Link 3312SR Reference Manual - Page 169

DGS-3312SR Layer 3 Gigabit Switch config ssh authmode Parameters password - This parameter may be chosen if the administrator wishes to use a locally configured password for authentication on the switch. publickey - This parameter may be chosen if the administrator wishes to use a publickey configuration set on a SSH server, for authentication. hostbased - This parameter may be chosen if the administrator wishes to use a host computer for authentication. This parameter is intended for Linux users requiring SSH authentication techniques and the host computer is running the Linux operating system with a SSH program previously installed. [enable | disable] - This allows you to enable or disable SSH authentication on the switch. Restrictions Only administrator-level users can issue this command. Example usage: To enable the SSH authentication mode by password: DGS-3312SR:4#config ssh authmode password enable Command: config ssh authmode password enable Success. DGS-3312SR:4# show ssh authmode Purpose Syntax Description Parameters Restrictions Used to display the SSH authentication mode setting. show ssh authmode This command will allow you to display the current SSH authentication set on the switch. None. Only administrator-level users can issue this command. Example usage: To view the current authentication mode set on the switch: DGS-3312SR:4#show ssh authmode Command: show ssh authmode The SSH authmode Password : Enable Publickey : Enable Hostbased : Enable DGS-3312SR:4# 163