D-Link 3312SR Reference Manual - Page 23
show serial_port, config serial_port, CTRL+C ESC q, SPACE n, ENTER
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
DGS-3312SR Layer 3 Gigabit Switch config 802.1p user_priority 1 0 config 802.1p user_priority 2 1 config 802.1p user_priority 3 3 config 802.1p user_priority 4 4 config 802.1p user_priority 5 5 config 802.1p user_priority 6 6 config 802.1p user_priority 7 7 config 802.1p default_priority 15:1-15:12 0 config bandwidth_control 15:1 rx_r CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All show serial_port Purpose Syntax Description Parameters Restrictions Used to display the current serial port settings. show serial_port This command displays the current serial port settings. None. None Example usage: To display the serial port setting: DGS-3312SR:4#show serial_port Command: show serial_port Baud Rate : 9600 Data Bits : 8 Parity Bits : None Stop Bits : 1 Auto-Logout : 10 mins DGS-3312SR:4# config serial_port Purpose Syntax Description Parameters Used to configure the serial port. config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes | 5_minutes | 10_minutes | 15_minutes]} This command is used to configure the serial port's baud rate and auto logout settings. baud_rate [9600 | 19200 | 38400 | 115200] − The serial bit rate used to communicate with the management host. auto logout - This parameter will set the time that the switch will wait before logging out automatically, if left idle. The choices that accompany this parameter are: 17