D-Link 3312SR Reference Manual - Page 63
show packet ports, show error ports, Frame Size
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DGS-3312SR Layer 3 Gigabit Switch show packet ports highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Restrictions None. Example usage: To display the packets analysis for port 7 of module 2: DGS-3312SR:4#show packet port 2:7 Command: show packet port 2:7 Port number : 2:7 Frame Size Frame Counts Frames/sec Frame Type Total Total/sec ------------ ------------ ---------- ---------- 64 3275 10 RX Bytes 408973 1657 65-127 755 10 RX Frames 4395 19 128-255 316 1 256-511 145 0 TX Bytes 7918 178 512-1023 15 0 TX Frames 111 2 1024-1518 0 0 Unicast RX 152 1 Multicast RX 557 2 Broadcast RX 3686 16 CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh show error ports Purpose Used to display the error statistics for a range of ports. Syntax show error ports Description This command will display all of the packet error statistics collected and logged by the switch for a given port list. Parameters − Specifies a range of ports to be displayed. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Restrictions None. Example usage: 57