D-Link 3312SR Reference Manual - Page 170

DGS-3312SR Layer 3 Gigabit Switch

164

config ssh server

Purpose

Used to configure the SSH server.

Syntax

config ssh server {maxsession <int 1-8> | contimeout <sec 120-

600> | authfail <int 2-20> | rekey [10min | 30min | 60min | never] |

port <tcp_port_number 1-65535>}

Description

This command allows you to configure the SSH server.

Parameters

maxsession <int 1-8>

- Allows the user to set the number of users

that may simultaneously access the switch. The default is 8.

contimeout <sec 120-600> -

Allows the user to set the connection

timeout. The user may set a time between 120 and 600 seconds.

The default is 300 seconds.

authfail <int 2-20>

- Allows the administrator to set the maximum

number of attempts that a user may try to log on utilizing SSH

authentication. After the maximum number of attempts is exceeded,

the switch will be disconnected and the user must reconnect to the

switch to attempt another login.

rekey [10min | 30min | 60min | never]

- Sets the time period that the

switch will change the security shell encryptions.

port <tcp_port_number 1-65535>

- Enter the TCP port number

associated with this function. The default TCP port number for SSH

is 22.

Restrictions

Only administrator-level users can issue this command.

Usage Example:

To configure the SSH server:

DGS-3312SR:4# config ssh server maxsession 2 contimeout 300 authfail 2

Command: config ssh server maxsession 2 contimeout 300 authfail 2

Success.

DGS-3312SR:4#

show ssh server

Purpose

Used to display the SSH server setting.

Syntax

show ssh server

Description

This command allows you to display the current SSH server setting.

Parameters

None.

Restrictions

Only adminstrator-level users can issue this command.

Usage Example:

To display the SSH server:

Section	Page
Introduction	7
	7
	7
Accessing the Switch via the Serial Port	7
Setting the Switch’s IP Address	8
Using the Console CLI	10
	10
	10
Connecting to the Switch	10
Command Syntax	16
Basic Switch Commands	18
Switch Port Commands	30
Port Security Commands	33
Network Management (SNMP) Commands	37
Switch Utility Commands	58
Network Monitoring Commands	62
Multiple Spanning Tree Protocol (MSTP) Commands	75
Forwarding Database Commands	88
Broadcast Storm Control Commands	95
QoS Commands	97
Port Mirroring Commands	105
VLAN Commands	110
Link Aggregation Commands	117
IP Commands (Including IP Multinetting)	123
IGMP Commands	128
IGMP Snooping Commands	131
MAC Notification Commands	139
Access Authentication Control Commands	143
SSH Commands	167
SSL Commands	175
802.1X Commands	180
Access Control List (ACL) Commands	192
Traffic Segmentation Commands	201
Stacking Commands	203
D-Link Single IP Management Commands	206
Time and SNTP Commands	216
ARP Commands	222
VRRP Commands	226
Routing Table Commands	233
Route Redistribution Commands	237
BOOTP Relay Commands	243
DNS Relay Commands	247
RIP Commands	251
DVMRP Commands	254
PIM Commands	259
IP Multicasting Commands	263
MD5 Configuration Commands	265
OSPF Configuration Commands	268
Command History List	288
Technical Specifications	290
	296
	296
	296
	296
	296
	296
	296
Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Co	296

D-Link 3312SR Reference Manual - Page 170

config ssh server, show ssh server

Page 170 highlights