D-Link 3312SR Reference Manual - Page 273
config ospf area, show ospf area, DGS-3312SR:4#delete ospf area 10.48.74.122
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
DGS-3312SR Layer 3 Gigabit Switch DGS-3312SR:4#delete ospf area 10.48.74.122 Command: delete ospf area 10.48.74.122 Success. DGS-3312SR:4# config ospf area Purpose Used to configure an OSPF area's settings. Syntax config ospf area type [normal | stub {stub_summary [enable | disable] | metric }] Description This command is used to configure an OSPF area's settings. Parameters − The OSPF area ID. The user may enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. type [normal | stub] − Allows the specification of the OSPF mode of operation − stub or normal. stub_summary [enable | disable] − Allows the OSPF area import of LSA advertisements to be enabled or disabled. metric − The OSPF area stub default cost. Restrictions Only administrator-level users can issue this command. Usage Example To configure an OSPF area's settings: DGS-3312SR:4#config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Command: config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Success. DGS-3312SR:4# show ospf area Purpose Used to display an OSPF area's configuration. Syntax show ospf area {} Description This command will display the current OSPF area configuration. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Restrictions None. 267
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/273.png)