D-Link 3312SR Reference Manual - Page 190
config radius delete, config radius, DGS-3312SR:4#config radius delete 1
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
DGS-3312SR Layer 3 Gigabit Switch config radius delete Purpose Syntax Description Parameters Restrictions Used to delete a previously entered RADIUS server configuration. config radius delete The config radius delete command is used to delete a previously entered RADIUS server configuration. − A number identifying the current set of RADIUS server settings the user wishes to delete. Up to 3 groups of RADIUS server settings can be entered on the switch. Only administrator-level users can issue this command. Example usage: To delete previously configured RADIUS server communication settings: DGS-3312SR:4#config radius delete 1 Command: config radius delete 1 Success. DGS-3312SR:4# config radius Purpose Syntax Description Parameters Restrictions Used to configure the switch's RADIUS settings. config radius {ipaddress | key | auth_port | acct_port } The config radius command is used to configure the switch's RADIUS settings. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the switch. ipaddress − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the switch. Up to 32 characters can be used. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. 184
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/190.png)