D-Link 3312SR Reference Manual - Page 159

DGS-3312SR Layer 3 Gigabit Switch

153

config authen server_host

configured TACACS+ server only. Specify an alphanumeric string

up to 254 characters or choose none.

timeout <int 1-255>

- Enter the time in seconds the switch will wait

for the server host to reply to an authentication request. The default

value is 5 seconds.

retransmit <int 1-255>

- Enter the value in the retransmit field to

change how many times the device will resend an authentication

request when the TACACS, XTACACS server does not respond.

This field is inoperable for the TACACS+ protocol.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To configure a TACACS authentication server host, with port number 4321, a timeout value of 12 seconds and a

retransmit count of 4.

DGS-3312SR:4#config authen server_host 10.1.1.121 protocol

tacacs port 4321 timeout 12 retransmit 4

Command: config authen server_host 10.1.1.121 protocol tacacs

port 4321 timeout 12 retransmit 4

Success.

DGS-3312SR:4#

delete authen server_host

Purpose

Used to delete a user-defined authentication server host.

Syntax

delete authen server_host <ipaddr> protocol [tacacs | xtacacs |

tacacs+]

Description

This command is used to delete a user-defined authentication

server host previously created on the switch.

Parameters

server_host <ipaddr>

- The IP address of the remote server host

the user wishes to delete.

protocol

– The protocol used by the server host the user wishes to

delete. The user may choose one of the following:

±

tacacs

– Enter this parameter if the server host utilizes the

TACACS protocol.

±

xtacacs

- Enter this parameter if the server host utilizes the

XTACACS protocol.

±

tacacs+

- Enter this parameter if the server host utilizes

the TACACS+ protocol.

±

radius

- Enter this parameter if the server host utilizes the

RADIUS protocol.

Restrictions

Only administrator-level users can issue this command.

Example usage:

Section	Page
Introduction	7
	7
	7
Accessing the Switch via the Serial Port	7
Setting the Switch’s IP Address	8
Using the Console CLI	10
	10
	10
Connecting to the Switch	10
Command Syntax	16
Basic Switch Commands	18
Switch Port Commands	30
Port Security Commands	33
Network Management (SNMP) Commands	37
Switch Utility Commands	58
Network Monitoring Commands	62
Multiple Spanning Tree Protocol (MSTP) Commands	75
Forwarding Database Commands	88
Broadcast Storm Control Commands	95
QoS Commands	97
Port Mirroring Commands	105
VLAN Commands	110
Link Aggregation Commands	117
IP Commands (Including IP Multinetting)	123
IGMP Commands	128
IGMP Snooping Commands	131
MAC Notification Commands	139
Access Authentication Control Commands	143
SSH Commands	167
SSL Commands	175
802.1X Commands	180
Access Control List (ACL) Commands	192
Traffic Segmentation Commands	201
Stacking Commands	203
D-Link Single IP Management Commands	206
Time and SNTP Commands	216
ARP Commands	222
VRRP Commands	226
Routing Table Commands	233
Route Redistribution Commands	237
BOOTP Relay Commands	243
DNS Relay Commands	247
RIP Commands	251
DVMRP Commands	254
PIM Commands	259
IP Multicasting Commands	263
MD5 Configuration Commands	265
OSPF Configuration Commands	268
Command History List	288
Technical Specifications	290
	296
	296
	296
	296
	296
	296
	296
Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Co	296

D-Link 3312SR Reference Manual - Page 159

config authen server_host, DGS-3312SR:4#config authen server_host 10.1.1.121 protocol

Page 159 highlights