D-Link 3312SR Reference Manual - Page 71
config syslog host
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
DGS-3312SR Layer 3 Gigabit Switch DGS-3312SR:4#create syslog host 1 ipaddress 10.53.13.200 severity all facility local0 state enable Command: create syslog host 1 ipaddress 10.53.13.200 severity all facility local0 state enable Success. DGS-3312SR:4# config syslog host Purpose Used to configure the syslog protocol to send system log data to a remote host. Syntax config syslog host [all | ] {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress | state [enable | disable]} Description The config syslog host command is used to configure the syslog protocol to send system log information to a remote host. 65
DGS-3312SR Layer 3 Gigabit Switch
65
DGS-3312SR:4#create syslog host 1 ipaddress 10.53.13.200
severity all facility local0 state enable
Command: create syslog host 1 ipaddress 10.53.13.200 severity
all facility local0 state enable
Success.
DGS-3312SR:4#
config syslog host
Purpose
Used to configure the syslog protocol to send system log data to a
remote host.
Syntax
config syslog host [all | <index 1-4>] {severity [informational |
warning | all] | facility [local0 | local1 | local2 | local3 | local4 |
local5 | local6 | local7] | udp_port<int> | ipaddress <ipaddr> |
state [enable | disable]}
Description
The
config syslog host
command is used to configure the syslog
protocol to send system log information to a remote host.