D-Link 3312SR Reference Manual - Page 283
show ospf ipif, Network Medium Type: BROADCAST
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
DGS-3312SR Layer 3 Gigabit Switch To configure all of the OSPF interfaces on the switch with a single group of parameters: DGS-3312SR:4#config ospf all state enable Command: config ospf all state enable Success. DGS-3312SR:4# show ospf ipif Purpose Syntax Description Parameters Restrictions Used to display the current OSPF interface settings for the specified interface name. show ospf ipif { | all} This command will display the current OSPF interface settings for the specified interface name. − The IP interface name for which you want to display the current OSPF interface settings. all - Entering this parameter will display all ospf Interface settings. None. Usage Example To display the current OSPF interface settings, for a specific OSPF interface: DGS-3312SR:4#show ospf ipif ipif2 Command: show ospf ipif ipif2 Interface Name: ipif2 Network Medium Type: BROADCAST Area ID: 1.0.0.0 Priority: 1 DR Address: 123.234.12.34 Hello Interval: 10 Transmit Delay: 1 Authentication: None IP Address: 123.234.12.34/24 ((Link Up) Metric: 1 Administrative State: Enabled DR State: DR Backup DR Address: None Dead Interval: 40 Retransmit Time: 5 Total Entries: 1 DGS-3312SR:4# Usage Example: To display the current OSPF interface settings, for all OSPF interfaces on the switch: DGS-3312SR:4#show ospf all Command: show ospf all Interface Name: System Network Medium Type: BROADCAST Area ID: 0.0.0.0 Priority: 1 DR Address: 10.42.73.10 Hello Interval: 10 Transmit Delay: 1 Authentication: None IP Address: 10.42.73.10/8 (Link Up) Metric: 1 Administrative State: Enabled DR State: DR Backup DR Address: None Dead Interval: 40 Retransmit Time: 5 277
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/283.png)