D-Link 3312SR Reference Manual - Page 47
create snmp group
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
DGS-3312SR Layer 3 Gigabit Switch create snmp group Message integrity − Ensures that packets have not been tampered with during transit. Authentication − Determines if an SNMP message is from a valid source. Restrictions Encryption − Scrambles the contents of messages to prevent it being viewed by an unauthorized source. noauth_nopriv − Specifies that no authorization and no encryption of packets is sent between the switch and a remote SNMP manager. auth_nopriv − Specifies that authorization will be required, but there will be no encryption of packets sent between the switch and a remote SNMP manager. auth_priv − Specifies that authorization will be required, and that packets sent between the switch and a remote SNMP manger will be encrypted. read_view - Specifies that the SNMP group being created can request SNMP messages. • − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the switch. write_view - Specifies write privileges for the SNMP group being created. • − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the switch. notify_view − Specifies that the SNMP group being created can receive SNMP trap messages generated by the switch's SNMP agent. • − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the switch. Only administrator-level users can issue this command. Example usage: To create an SNMP group named "sg1:" DGS-3312SR:4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Success. DGS-3312SR:4# 41