D-Link 3312SR Reference Manual - Page 118
delete link_aggregation group_id, config link_aggregation
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Example usage: DGS-3312SR Layer 3 Gigabit Switch To create a link aggregation group: DGS-3312SR:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DGS-3312SR:4# delete link_aggregation group_id Purpose Used to delete a previously configured link aggregation group. Syntax delete link_aggregation group_id Description This command is used to delete a previously configured link aggregation group. Parameters − Specifies the group ID. The switch allows up to 6 link aggregation groups to be configured. The group number identifies each of the groups. Restrictions Only administrator-level users can issue this command. Example usage: To delete link aggregation group: DGS-3312SR:4#delete link_aggregation group_id 6 Command: delete link_aggregation group_id 6 Success. DGS-3312SR:4# config link_aggregation Purpose Syntax Description Parameters Used to configure a previously created link aggregation group. config link_aggregation group_id {master_port | ports | state [enable | disable] This command allows you to configure a link aggregation group that was created with the create link_aggregation command above. The DGS-3312SR supports link aggregation cross box which specifies that link aggregation groups may be spread over multiple switches in the switching stack. group _id − Specifies the group ID. The switch allows up to 6 link aggregation groups to be configured. The group number identifies each of the groups. master_port − Master port ID. Specifies which port (by port number) of the link aggregation group will be the master port. All of the ports in a link aggregation group will share the port configuration 112