D-Link 3312SR Reference Manual - Page 166
config admin local_enable, DGS-3312SR:4, DGS-3312SR:4#config admin local_enable, Success.
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
DGS-3312SR Layer 3 Gigabit Switch Password: ****** DGS-3312SR:4# config admin local_enable Purpose Used to configure the local enable password for administrator level privileges. Syntax config admin local_enable Description This command will configure the locally enabled password for the enable admin command. When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here, that is set locally on the switch. Parameters - After entering this command, the user will be prompted to enter the old password, then a new password in an alphanumeric string of no more than 15 characters, and finally prompted to enter the new password again to confirm. See the example below. Restrictions Only administrator-level users can issue this command. Example usage: To configure the password for the "local_enable" authentication method. DGS-3312SR:4#config admin local_enable Command: config admin local_enable Enter the old password: ****** Enter the case-sensitive new password:****** Enter the new password again for confirmation:****** Success. DGS-3312SR:4# 160
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/166.png)