D-Link 3312SR Reference Manual - Page 276
show ospf host_route, create ospf aggregation, Host Address
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
DGS-3312SR Layer 3 Gigabit Switch show ospf host_route Restrictions None. Usage Example: To display the current OSPF host route table: DGS-3312SR:4#show ospf host_route Command: show ospf host_route Host Address 10.48.73.21 10.48.74.122 Metric 2 1 Area_ID ----------10.1.1.1 10.1.1.1 TOS ------ Total Entries: 2 DGS-3312SR:4# create ospf aggregation Purpose Used to configure OSPF area aggregation settings. Syntax create ospf aggregation lsdb_type summary {advertise [enable | disable]} Description This command is used to create an OSPF area aggregation. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − The type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Restrictions Only administrator-level users can issue this command. Usage Example: To create an OSPF area aggregation: DGS-3312SR:4#create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success. DGS-3312SR:4# 270
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/276.png)