D-Link 3312SR Reference Manual - Page 46

DGS-3312SR Layer 3 Gigabit Switch show snmp engineID Purpose Syntax Description Parameters Restrictions Used to display the identification of the SNMP engine on the switch. show snmp engineID The show snmp engineID command displays the identification of the SNMP engine on the switch. None. None. Example usage: To display the current name of the SNMP engine on the switch: DGS-3312SR:4#show snmp engineID Command: show snmp engineID SNMP Engine ID : 0035636666 DGS-3312SR:4# create snmp group Purpose Used to create a new SNMP group, or a table that maps SNMP users to SNMP views. Syntax create snmp group [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] {read_view | write_view | notify_view } Description The create snmp group command creates a new SNMP group, or a table that maps SNMP users to SNMP views. Parameters − An alphanumeric name of up to 32 characters that will identify the SNMP group with which the new SNMP user will be associated. v1 - Specifies that SNMP version 1 will be used. The Simple Network Management Protocol (SNMP), version 1, is a network management protocol that provides a means to monitor and control network devices. v2c - Specifies that SNMP version 2c will be used. The SNMP v2c supports both centralized and distributed network management strategies. It includes improvements in the Structure of Management Information (SMI) and adds some security features. v3 - Specifies that the SNMP version 3 will be used. SNMP v3 provides secure access to devices through a combination of authentication and encrypting packets over the network. SNMP v3 adds: 40